DESIGNED FOR URBAN ADVENTURES

CUSTOM E-SCOOTER SHARING.

DESIGNED FOR URBAN ADVENTURES

CUSTOM E-SCOOTER SHARING.

If you’re looking to start a popular dynamic e-scooter sharing, then look no further. With fork suspension, pull-to-go accelerating system and a 20% hill climb ability, this powerful scooter will tackle the most difficult urban challenges thrown at it. We design, develop and build the type of mobility sharing you’re looking for, from private E-Scooter sharing schemes for businesses and corporations to public E-Scooter sharing for major city systems.

Created the way you want it

READY TO-GO FLEET.

Created the way you want it

READY TO-GO FLEET.

With a stylish lightweight compact design, ANTIK e-scooter is built to improve every aspect of urban micro-mobility. Crafted from high quality aluminium-steel alloy, and equipped with a 350w motor and a 13.2Ah battery, the scooter offers both fun and durability. To perfectly accommodate the specific requirements of a prosperous e-scooter sharing, we have combined our best designs with the finest motors and extended-range battery systems. 

  • ESTIMATED RANGE 40 km range
  • MOTOR POWER350W
  • BATTERY13Ah / 36V Battery Capacity / 468 Wh
  • TOP SPEED25km/h

ANTI-THEFT FEATURES.

  • This model features a network enabled 4G Smart GPS system, that supports GPS tracking. In an event of theft, the stolen scooter can be easily located anywhere in the world.
  • Low-speed zone intelligent speed adaptation – The scooter’s maximum speed is automatically adjusted according to the current speed limit in a specific low-speed zone (ex. pedestrian zone).
  • Restricted zone fees – The administrative back-end allows you to set and manage restricted zone rules, as well as to forbid the user from riding outside the city limits or leaving the scooter in private areas (based on GPS location).
  • Back-up battery for constant connectivity – The scooter is fitted with a back-up battery to keep the GPS tracking system active at all times.
  • Built-in gyroscope sensor – The gyroscope sensor is responsible for determining the scooter’s upright position. This feature was specially designed for scooter-sharing systems, as it notifies the admin when the scooter’s position changes from vertical to horizontal (the scooter has fell).

GENERAL INFORMATION

  • Frame material: High-quality aluminium-steel alloy
  • Charger: 4 amp charger / XLR Connector 
  • Display: 2.25″ OLED built-in frame (color or white / content-customisable)
  • Brakes: Front and rear drum brakes
  • Tires: 10″ wheels with tubeless tires
  • Lights: Front LED light (1000 lumens), rear safety brake light
  • Max rider weight: 120kg
  • Waterproof rating: IP54 water-resistance rating

TECH SPECIFICATION

  • Top Speed: 25kmh *Factory speed limit acording to the legislation of each country
  • Motor power: 350W
  • Battery range: 40km
  • Battery capacity: 13Ah / 36V / 468 Wh
  • Charge time: 2,5 hours
  • Climb ability: 20%
CERTIFICATIONS
Bringing the art to the smart

SPECIAL SHARING FEATURES.

For an ultimate user experience, we’ve implemented further sharing-specific features to make rides convenient and enjoyable, all while complying with traffic safety rules and regulations. It’s our mission is to make commuting pure and smooth by ensuring the safest riding conditions.

BACK-UP BATTERY FOR CONSTANT CONNECTIVITY

The scooter is fitted with a back-up battery to keep the GPS tracking system active at all times.

smart 4G module WITH GPS tracking and alarm

Monitor and locate the position of your fleet at any time, set a speed limit in low-speed zones (pedestrian zones) and specify forbidden drop-off areas.

FRONT FORK SUSPENSION

With front fork shock absorbers, the e-scooter has greater stability and improved handling when cornering and braking. This allows for faster rides on different kinds of surfaces.

BUILT-IN GYROSCOPE SENSOR

The gyroscope sensor is responsible for determining the scooter’s upright position. This feature was specially designed for scooter-sharing systems, as it notifies the admin when the scooter’s position changes from vertical to horizontal (the scooter has fell).
For More smiles per hour

E-SCOOTER QUALITIES & FEATURES.

FRONT fork suspension

High Capacity Lithium Battery

CONVENIENT PULL-TO-GO POWER

Enhanced anti-theft encryption

high quality steel frame

LED tail lights and headlights

maintenance free tubeless tires

INTELLIGENT OLED DISPLAY

For More smiles per hour

E-SCOOTER
QUALITIES & FEATURES.

YOUR BRAND. YOUR COLORS.

YOUR VISIBILITY.

Thanks to the knowledge and expertise we have built up over the years, we can design a truly unique Scooter for your sharing. We paint every metal element based on your color schemes, artwork and lettering requirements. Discover breathtaking designs that perfectly represent your brand. 

customizable elements of the e-scooter

CHOOSE YOUR BASE COLOR

CUSTOM ARTWORK & DESIGN

YOUR BRANDS' LOGOS

YOUR BRAND. YOUR COLORS.

YOUR VISIBILITY.

Thanks to the knowledge and expertise we have built up over the years, we can design a truly unique Scooter for your sharing. We paint every metal element based on your color schemes, artwork and lettering requirements. Discover breathtaking designs that perfectly represent your brand. 

customizable elements

CHOOSE YOUR BASE COLOR

YOUR BRANDS' LOGOS

CUSTOM ARTWORK & DESIGN

Performance First

BEST RIDES
HAPPEN ON TWO WHEELS.

Performance First

BEST RIDES HAPPEN ON TWO WHEELS.

If you are looking to launch a personalized e-Scooter Sharing, this model will be a game-changer as it is perfectly integrable with our unique sharing platform. Developed with precision by our IT specialists and built by the greatest manufacturers in the industry, this model integrates many intelligent and high-efficiency features ensuring the most enjoyable riding experience. 

01

COMPACT SIZE, FRONT SUSPENSION & TUBELESS TIRES.

Despite its small size, this model features a long and stable platform with a non-slip grip, making for a safe and extra-comfortable riding position. The scooter comes equipped with a front fork suspension, to make cruising in the city streets as smooth as possible. Airless tires are essential for maintenance, ensuring that the tires never go flat.

02

INTELLIGENT OLED BUILT-IN FRAME DISPLAY - THE HEART OF SMART.

The E-Scooter is fitted with the latest built-in frame 2.25″ SMART OLED display showing several status indicators, such as battery percentage, current speed, total trip time and distance. Additionally, our cloud-based solution allows real-time interaction with the e-scooter user via the OLED display (for ex. to show directions to the closest charging station or any other content such as advertisements).

03

POWERFUL SAFETY LIGHTS FOR GREATER VISIBILITY AT NIGHT.

The e-scooter fleet is fully equipped with a modern built-in LED technology for a greater safety and increased visibility at night (powerful front LED light and rear safety brake light).

04

THE E-SCOOTER FLEET COMES WITH A CHARGING INFRASTRUCTURE.

When it comes to operating an e-mobility sharing network, the main challenge is to find an efficient method to charge your fleet. In order to address this issue, we have developed an advanced charging infrastructure system, ECHIRON-X MOBILITY CHARGING STATION, which was built to work with your fleet seamlessly, so you no longer have to wonder about these concerns when running your sharing.

URBAN E-SCOOTER GALLERY.

Antik

URBAN E-SCOOTER GALLERY.

  • Antik
REAL TIME RANGE CALCULATION

THE PREMIUM
LITHIUM-ION BATTERY

The E-Scooter uses powerful 13Ah Battery (36V Battery Capacity / 468 Wh), with an advanced BMS (Battery Management System), which utilizes dual battery overheating protection. The average battery-assisted range is 40 km and it takes approximately 7 hours for it to fully charge. The user can continue the ride even when the scooter runs out of battery, similar to riding a regular manual scooter.

Under discharge protection

Over charging protection

Over current protection

Short circuit protection

Temperature protection

Battery balancer

LAUNCH YOUR OWN SHARING

OUR CASE STUDIES: HOW TO START ?

Our Smart mobility solutions are suitable for various business environments, from corporations that want to provide their employees with a sustainable transportation solution, to universities that want to give their students an access to affordable and convenient vehicles, or investors who wish to develop a public ride sharing system in their city.

LAUNCH YOUR OWN SHARING

OUR CASE STUDIES: HOW TO START ?

Our Smart mobility solutions are suitable for various business environments, from corporations that want to provide their employees with a sustainable transportation solution, to universities that want to give their students an access to affordable and convenient vehicles, or investors who wish to develop a public ride sharing system in their city.

ELECTRIFIED VS. MANUAL

PRIVATE VS. PUBLIC

LARGE VS. SMALL

URBAN VS. HOLIDAY

CORPORATIONS & INDUSTRIAL PARKS

SCHOOLS AND UNIVERSITY CAMPUSES

HOSPITALITY - HOTELS & RESORTS

SPORT AND RECREATIONAL AREALS

HOSPITALS AND HEALTHCARE FACILITIES

GOVERNMENTS, CITIES & MUNICIPALITIES

Where creativity meets technology

PERSONALIZED PLATFORM.

ANTIK Technology® paves the way for a future of mobility which is smarter, more efficient and importantly, emission-free. We provide an entire mobility-sharing solution for your company’s specific fleet requirements that includes custom charging infrastructure, customised e-vehicle fleet, a personalized mobile app, and a management backend.

YOUR
COLORS

YOUR
ARTWORK

YOUR
LANGUAGE

YOUR
VEHICLES

YOUR
CHARGING STATIONS

YOUR
PAYMENT GATEWAY

designed by the best

CUSTOM SHARING APP.

The overall appearance of the APP, as well as the main features, are customized to best reflect the brand of your business. Amaze your customers with a wide range of innovative features and an elegant, intuitive user interface.

Features: QR scan function, secure on-line payments, map of vehicles and charging stations, user profile settings, ride history & payment history, subscription charges.

Cloud based solution tailored to your needs

YOUR OWN MANAGEMENT SYSTEM.

Having all relevant data compiled on a single platform makes it easier to perform fleet management operations. Our cloud service transfers comprehensive e-mobility data to your custom backend system through every vehicles’s built-in ECU.

Features: Device monitoring, fleet tracking & remote control, maintenance management, operational data statistics, secure connection, pricing & tariffs, manage notifications, analytics & reporting…

UTILIZING THE POWER from the sun

POWERING THE FUTURE WITH SOLAR ENERGY

With expanding our e-mobility division by a fleet of Mountain E-Bikes, we’ve stepped into the world of solar energy. Since then, we have established a solar panel division which utilises renewable solar energy to power fleets in charging stations with no electrical power available in the area. Get ready for the future of e-mobility with us !

Where creativity meets technology

DEVELOPED WITH EUROPEAN EXPERTISE.

ANTIK Technology®, an international leader in the development of innovative e-mobility solutions, headquartered in Central Europe (Slovakia), offers an established portfolio of exceptional software solutions. With every project, our development team is dedicated to achieving the highest performance standards.

where operational efficiency meets affordability

BUILT BY THE BEST IN THE INDUSTRY.

The ANTIK Technology® Manufacturing division employs cutting-edge automation and decades of expertise in design, engineering and development of smart electronic hardware. We are continuously inventing new approaches to make electric mobility a convenient choice and an appealing alternative for the user.

Where creativity meets technology

DEVELOPED WITH EUROPEAN EXPERTISE.

ANTIK Technology®, an international leader in the development of innovative e-mobility solutions, headquartered in Central Europe (Slovakia), offers an established portfolio of exceptional software solutions. With every project, our development team is dedicated to achieving the highest performance standards.

where efficiency meets affordability

BUILT BY THE BEST
IN THE INDUSTRY.

The ANTIK Technology® Manufacturing division employs cutting-edge automation and decades of expertise in design, engineering and development of smart electronic hardware. We are continuously inventing new approaches to make electric mobility a convenient choice and an appealing alternative for the user.

DISCOVER WHAT’S POSSIBLE

EXPAND YOUR FLEET.

Custom City Bike sharing module
Custom City E-Bike sharing module
Custom Mountain E-Bike sharing module
Custom E-Moped sharing module
Custom E-Motorbike sharing module
Custom Kayak sharing module
POWERED BY INNOVATION

EXPAND YOUR
CHARGING INFRASTRUCTURE.

The universal 9-in-1 multivehicle e-mobility compatible charging station.
The unique digital signage advertisement EV charging station with 55" color display.
The powerful dual-gun EV charging station (IEC Type 2, EVSE – 3-AC).
The intelligent, universal remotely controlled e-mobility compatible 230 V power outlet.

GET STARTED NOW !

We build solutions that build your business.

We are always excited to discuss mobility sharing. Feel free to contact us at info@antiksmartmobility.com. If you have questions concerning a specific project, please use the online form in the “Contact Us” section in the main menu. LET’S DISCUSS YOUR IDEA TODAY !